Entry tags:
locks and keys
I rekeyed two locks today; it was my first time doing that. One was an Andersen storm door lock, and was very easy to rekey. The other was an old deadbolt lock which both Lowes and Home Depot hadn't been able to do. Lowes had just looked at it and said "No", which makes me think they refused simply because it's a brand they don't sell. The guy at Home Depot, on the other hand, at least tried. But apparently because of it being an older style, he wasn't able to get it apart. I had watched him trying, and it looked like something was stuck. He wasn't able to get it apart, to get to the pins.
Today, I was able to get it apart fairly easily. The one end of the cylinder needed to be screwed off - maybe the Home Depot guy didn't realize that. I have a Kwikset rekeying kit. The springs in the kit don't exactly match the ones from the old lock. So I tried reusing them, but in the process lost one. I searched high and low for it, but it's disappeared into the ether. I ended up using one of the non-matching springs, which made it more difficult as it stuck out more. And my kit didn't have a tool that fit for keeping the bottom pins and springs pushed down (aka "follower bar")*, so I had to improvise. And the top pins fell out a few times, and each time the sizes of the pins didn't seem to match what I had written down before... weird. So I got out new top pins. I finally got it back together and working with the new key.
*which is probably a good thing, in hindsight. If I had found the right instructions, and if my follower bar fit, I wouldn't have seen that the springs and bottom pins had a lot of oxidation on them, which was making them stick. It was when I was cleaning off the springs, that the one sprung away and disappeared.
Today, I was able to get it apart fairly easily. The one end of the cylinder needed to be screwed off - maybe the Home Depot guy didn't realize that. I have a Kwikset rekeying kit. The springs in the kit don't exactly match the ones from the old lock. So I tried reusing them, but in the process lost one. I searched high and low for it, but it's disappeared into the ether. I ended up using one of the non-matching springs, which made it more difficult as it stuck out more. And my kit didn't have a tool that fit for keeping the bottom pins and springs pushed down (aka "follower bar")*, so I had to improvise. And the top pins fell out a few times, and each time the sizes of the pins didn't seem to match what I had written down before... weird. So I got out new top pins. I finally got it back together and working with the new key.
*which is probably a good thing, in hindsight. If I had found the right instructions, and if my follower bar fit, I wouldn't have seen that the springs and bottom pins had a lot of oxidation on them, which was making them stick. It was when I was cleaning off the springs, that the one sprung away and disappeared.