replace battery on oral-b pulsar
Monday, November 10th, 2014 08:08 amOh wow. I was just able to successfully replace the battery on an Oral-b Pulsar toothbrush.
After unscrewing the handle, don't pull back on the small end-part of the metal strip, so that the battery can be pulled out. That is what I tried on a different toothbrush, the last time. The metal will either break, or you won't easily be able to bend it back into the right position after replacing the battery, so that it still exerts the right amount of pressure on the battery. I tried putting various things in the end of the cap to push on the metal, but none worked reliably for me.
Some people have found work-arounds using the above method, but I didn't try that way again. Also, in my toothbrushes, the battery didn't have a bump on the negative end.
Instead, I took a small screwdriver and carefully pulled/bent back the metal where it is wider, on the side. It took some effort, as the metal was curved in the opposite direction that I was pulling in. Then while pulling it back like that with one hand (just far enough as is necessary), I pulled the battery out with my other hand. Then after replacing the battery, when you screw the end back on, it presses the metal back into the correct position. It did me take a few tries to get the end to screw back on though.
After unscrewing the handle, don't pull back on the small end-part of the metal strip, so that the battery can be pulled out. That is what I tried on a different toothbrush, the last time. The metal will either break, or you won't easily be able to bend it back into the right position after replacing the battery, so that it still exerts the right amount of pressure on the battery. I tried putting various things in the end of the cap to push on the metal, but none worked reliably for me.
Some people have found work-arounds using the above method, but I didn't try that way again. Also, in my toothbrushes, the battery didn't have a bump on the negative end.
Instead, I took a small screwdriver and carefully pulled/bent back the metal where it is wider, on the side. It took some effort, as the metal was curved in the opposite direction that I was pulling in. Then while pulling it back like that with one hand (just far enough as is necessary), I pulled the battery out with my other hand. Then after replacing the battery, when you screw the end back on, it presses the metal back into the correct position. It did me take a few tries to get the end to screw back on though.