darkoshi: (Default)
When getting a digital TV converter box, these are some good things to have:

- a remote which can be programmed for your TV, so you can use the same remote for the box and TV. Or perhaps another remote could be programmed to control both; I haven't tried that yet; not sure what program code the box would have.

- a remote with a dedicated button for switching between the picture modes, so you can switch between wide-screen and cropped modes with a single button press, as opposed to having to go into a menu. In wide-screen mode, some broadcasts display as a small rectangle on the screen - these can be switched to full-screen mode without losing any of the picture; but other broadcasts are wide-screen mode, which I don't want cropped.

- I'm not sure if any boxes have this functionality, but it would be nice to be able to save a certain order for the channels in memory, so that when using the channel up/down buttons, you would first get all the regular channels, and you could save all the other special channels (like the multiple weather channels) at the end.

- closed-captioning capability, if your TV doesn't already have this.


Qiao brought over an indoor antenna with a built-in powered amplifier, to try out. However, it did not work except with the amplifier turned off. I read that if you are close to the broadcasters, the amplifier may overwhelm things, so perhaps that is why it did not work. A passive antenna works best for me.

In regards to antennas, I've also noticed that the signal strength may change markedly not only depending on how the antenna is positioned, but also depending on where you or other people are located within the room. The signal strength may be good while your hand is hovering near the antenna, and worse when you take the hand away. Or the signal may be good while I'm sitting on the couch, but bad if I'm in the part of the room where I usually exercise.

With regards to the antenna "ears", the signal may be best with an ear extended to a certain length - not all the way in, nor extended all the way out.
darkoshi: (Default)
I tried moving the antenna outside via a long connecting cable through the doorway (as a test), but that did not improve the signal strength noticeably. I tried connecting to various wires instead of the antenna, using one of those connectors that converts between coax and 2 wire leads... interestingly, using just that connector and an alligator clip jumper wire on one lead resulted in about as good reception as the antenna.

In the end, I determined that just slightly repositioning the antenna and its parts makes the most difference. But it is quite sensitive (euphemism for "frustrating", heheh) - just moving one part slightly sometimes results in a 20% drop in signal, and then even when you move the part back to its original position, it refuses to go back up to the original signal strength unless you keep fiddling around with it for several minutes again.

July 2025

S M T W T F S
  1234 5
6 789101112
13141516171819
20212223242526
2728293031  

Syndicate

RSS Atom

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Wednesday, July 9th, 2025 02:22 am
Powered by Dreamwidth Studios